8inch slurry pumps

H series heavy duty slurry pumps are end-suction, split-case, centrifugal slurry pumps provide excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost.

Wetted Parts
Liners – Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance.
Impeller – Hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Throat bush – Hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

Shaft seal
Expeller Seal(Centrifugal Seal) – Available with low flow water flush or zero flow (grease lubricated) options to provide exceptional sealing where water introduction to the seal is intolerable or limited.
Stuffing Box – Gland sealing with packing and lantern ring.

Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. only four through bolts are required to hold the cartridge type housing in the frame.

Pump Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.

frame base – A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

H series Centrifugal Heavy Duty Slurry Pumps are designed for handling highly abrasive,high density slurries in metallurgy industry, mining industry, coal, power, building material and other industrial departments. The pumps of these model also can be installed as multi-stage series.

This series slurry pump also named according the working conditions, such as

De-Watering Screen Pump, Taillings Pump, Metboom Pump

Feedprep Pump, Scavenger Feed Pump, Re-Cleaner Pump

Ballmill discharge Pump, Ruffer Feed Pump, Transfer to feedprep Pump

Metboom Return Pump, Thickner Underflow Pump, Thickner Tailings Pump

Lime Slurry Pump, Rinse Pump, Dilute Pump, Booster pump

Re-Cleaner Pump, Rougher Feed Pump, Tailings booster Pump, Mill slurry Pump

Mill feed water Pump, Disc filter basin flushing Pump, Mixing tank slurry Pump

Gas cleaning slurry Pump, Windbox slurry Pump, Pellet hand scrubber slurry pump

Process recycle Pump, Scrubber slurry Pump, Prop pellets undersize Pump

Screen feeder Pump, Furn disch scrubber slurry Pump, Cosmetic recycle water Pump

Backwash Pump, Venturi scrubber slurry pump, Clarifier underflow pump

Pipeline transfer pump,.etc

www.librafluid.com